13
Lowes.com
OPERATING INSTRUCTIONS
Timer Button
• The timer button should be used to set the countdown for the unit's main power.
• If the unit is powered OFF, you can press the timer button to power On the unit. The emberbed will
glow at the lowest brightness setting unless a different setting was saved in the memory.
• Press the timer button again to scroll through the timer settings: 30, 1h, 2h, 3h, 4h, 5h, 6h, 7h, 8h,
9h and OFF.
• When the timer reaches zero, it will turn OFF the main power and will maintain the other settings in
memory.
Downlight Button
• The downlight button controls the LED downlights.
• If the unit is powered OFF, you can press the downlight button to power On the unit. The
emberbed will glow at the lowest brightness setting unless a different setting was saved in the
memory.
Memory Function
• When the unit is powered OFF, all function settings (excluding timer) will be saved.
• When the unit is OFF, pressing the power button once on the insert control panel or on the remote
control will turn the unit On and "wake up" the saved function settings.
• When the unit is OFF, press any function button to "wake up" the individual function at the last
saved setting. Press the button again to adjust it and press the main power button on the insert or
on the remote control to turn the unit OFF and save the new setting into memory.
• When the unit is powered ON, the LED will show the saved temperature setting. If a temperature
setting was not saved, it will show the flame brightness setting saved in memory. If neither one has
a setting saved to memory, then only the emberbed will glow (as a power light indicator).
• To reset the memory, hold down the main power button for 5 seconds at any time. When this
happens, the LED readout will blink with four zeros three times.
• Another way to reset the memory is to unplug the unit from the wall.
Heater Override Switch
This appliance has a rocker
switch located on the side of the
insert (L). This switch will override
power to the heater to prevent the
heater from being accidentally or
unintentionally powered on. This
feature is primarily added to help
prevent children from powering on
the heater when it is not desired.
M
To use the remote control,
first remove the plastic tab
by gently pullling.
M
To use the remote control,
first remove the plastic tab
by gently pullling.
Heater Power
ON
Heater Power
OFF
