28
_______________________________
MODULATION LOGIC
REFLEX-PRO-X provides four identical MODULATION LOGIC modules as modulation source. Each provides two
modulation sources slots which create a new output depending on the selected algorithm and sources.
SOURCE 1/2:
Right click opens the Dropdown menu for modulation source selection. Available sources are all
LFO/ENV/GATE slots as well as the preceding LOGIC slots.
Left click and drag sets the amount of the set modulation source for the appropriate slot. [-100% - 100%]
MODE
:
Logic algorithm for the selected sources. Available modes are:
Mode
Description
Example
•
ADD:
Output of Source1 and Source2 are added.
-0.5 ; 0.2 => -0.3
•
MULTIPLY:
Output of Source1 and Source2 are multiplied.
-0.5 ; 0.2 => -0.25
•
MIN:
The minimum value of both sources
-0.5 ; 0.2 => -0.5
•
MAX:
The maximum value of both sources
-0.5 ; 0.2 => 0.2
•
ABS MIN:
The absolute minimum value of both sources
-0.5 ; 0.2 => 0.2
•
ABS MAX:
The absolute maximum value of both sources
-0.5 ; 0.2 => 0.5
•
GATE:
If absolute value of Source1 is higher than absolute value
of Source2 output is absolute value of Source1, else 0
-0.5 ; 0.2 => 0.5
-0.5 ; 0.7 => 0
•
HIGHER:
If Source1 is higher than Source2 output is 1, else 0
-0-5 ; 0,2 => 0
0-5 ; 0,2 => 1
•
LOWER:
If Source1 is lower than Source2 output is 1, else 0
-0-5 ; 0,2 => 1
0-5 ; 0,2 => 0
GLIDE:
Amount of smoothing between steps. [0%- 100%]
SMOOTH:
Overall depth of the MODULATION LOGIC output. [0%- 100%] The depth itself can also de
modulated by any modulation source.
Have fun!
©
2020-2021
doc version 1.2.0
