Sturtevant Richmont
Global Reach. Local Support.
3203 N. Wolf Road, Franklin Park, IL 60131
Phones: 847/455-8677 800/877-1347
Fax: 847/455-0347
E-Mail: [email protected]
Website: www.srtorque.com
OPERATING INSTRUCTIONS
Adjustable Torque Screwdrivers - Models CAL 36/4 and CAL 40
Sturtevant Richmont adjustable torque screwdrivers are designed & manufactured to provide consistent user-settable
torque in high-cycle and maintenance applications. They meet ASME B107.14M and ISO 6789 specifications of ± 6%
preset value accuracy from 20% to 100% of capacity, and ± 1.2% of capacity when set below 20% of capacity. These
specifications are met in both the clockwise [CW] and counter-clockwise [CCW] directions.
S/R adjustable torque screwdrivers signal the operator that the set torque has been attained by emitting a distinct
audible and tactile impulse (click).
Setting Instructions
1. Remove the black vinyl cap from the rear of the screwdriver.
2. Raise the Torque Adjusting Key from the stored and locked position.
3. Rotate the torque adjusting key to align the lens line with the desired torque.
a. Use the markings on the shaft to determine torque scale and setting.
b. Rotate the Torque Adjusting Key clockwise (CW) to increase the torque setting.
c. Rotate the Torque Adjusting Key counter-clockwise (CCW) to decrease the torque setting.
4. When the desired torque is directly under the Lens Line, fold the Torque Adjusting Key back to the stored and
locked position. If desired, use the enclosed screw to affix the Torque Adusting Key in place.
5. Replace the black vinyl cap on the rear of the screwdriver.
Operating The Screwdriver
1.
Set torque per procedure above.
2.
insert bit (or adapter and socket) into Bit Holder on end of Shaft.
3.
Engage fastener completely with bit (or socket).
4.
Rotate screwdriver steadily until “click” is heard and felt. Further rotation will not tighten fastener futher.
Care and Cleaning
Return screwdriver to its lowest setting when it is to be stored for any period of time. Clean the screwdrive with a soft,
damp cloth. Do not immerse the screwdriver in cleaning fluids.
Use of Extensions and Adapters
Only in-line extensions should be used with your screwdriver. The maximum recommended overall length of any
extension is six inches (6”).
Содержание EMTSK 36/4
Страница 4: ......
