Stulz Free-Air-3-IN Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 31

Stulz Free-Air-3-IN Скачать руководство пользователя страница 17

17

Free-AIr-3-IN

© STULZ SpA – all rights reserved EN/02.2018

4.2. Storage

Except differently agreed, standard packing of units is composed of: a pallet under the unit, fixed to
its lower frame, protective film around the surface (except bottom side in contact with the pallet) and
air bag on the upper part.

INFOrMATION

Standard packing doesn’t protect the unit from rain and bad weather.
Standard packing is not suitable for seafreight.
Standard packing is not suitable for airfreight

Following information can be found on packing:

• STULZ logo
• Unit code
• Accessories put in the packing
• Warning symbols

If unit is stored before installation, comply with following instructions:

• Don’t expose to direct solar radiation
• Store the unit with its original packing

Ambient conditions for storage are the following:

• Ambient temperature min / max = -20°C / +60°C
• Max humidity RH 90%

4.3. removal of packing

• Remove packing without damaging the unit: remove top air bag, external film, lateral and corner

protections

• Recover any document or component inside the packing
• Keep original packing (pallet and protections) for future shipments

ATTeNTION

Use original packing to ship the unit to any other destination.
If packing disposal is necessary, we remind to dispose different materials suitably (see chapter
"9. Uninstalling and disposal of the unit").

5. Installation

DANGer

Never work on the unit without disconnecting all power supplies before. Prior to drilling holes or
making cuts on the cabinet, make sure that holes, screws, cables, etc. do not interfere with the
equipment which has already been installed.

«
...
15
16
17
18
19
...
»

Содержание Free-Air-3-IN
































Отзывы:

Нет отзывов