Stulz CVC 07 001yy, Руководство по эксплуатации

Страница: 28 / 42

E/1203/30A/28
10.6 EVAPORATOR
This is the part where the transfer of the heat, contained in the air in the cabinet, to the refrigerant
gas takes place .
It consists of copper pipes and aluminium fins.
(suitable only for non-corrosive and non-salty environments)
11. Motors
11.1 COMPRESSOR
Electric motor with a squirrel cage rotor, positioned inside the compressor and cooled by the air
flow. It is mounted on anti-vibration springs to reduce vibrations.
11.2 FANS
These may be of different types depending on the model. They are either:
- multiblade axial, with outside rotor on bearings, dynamically balanced;
- compact axial, on bearings;
- radial, with plastic or metal rotor, on bearings;
These fans are manufactured in accordance with Standard EN 60 335 1. They are treated with
anticorrosion plastic materials, with class B insulation and class 1 protection.
The motor protection is IP44, in accordance with Standard DIN40500 whereas the safety rate
complies with Standards DIN30110.
Noise levels are consistent with Standard DIN 45635.