2
1.
Make Sure you have the correct product for your local
supply voltage. This will be marked on the side panel
of the PAX+ monitor.
2.
Only use the A.C. power cord / mains lead supplied
with the product. Replace if it becomes damaged in
any
way.
3.
Never operate without, or remove, the safety ground
(earth) from the A.C. power cord / mains lead.
4.
Do not attempt to remove screws or panels on your
monitor. There are no user serviceable parts inside.
5.
Do not operate the unit next to heat sources such as
radiators.
6.
The unit should not be operated or stored near rain or
moisture.
7.
Do not allow objects or liquid to enter the unit.
8.
This equipment must not be exposed to dripping or
splashing and no objects filled with liquids should be
placed on top of it.
9.
Write the serial number in the box provided in the
Service Information part of this manual for future
reference.
10.
If the unit gets damaged, has been dropped or appears
to have developed a fault refer to the Service
Information section for details.
WARNING
THIS APPARATUS MUST BE EARTHED (GROUNDED)
READ THIS BEFORE YOU USE YOUR PRODUCT
SAFETY INSTRUCTIONS
www.studiomaster.com
www.studiomaster.com
PX+
PASSIVE MONITOR
PA X+
POWERED MONITOR