32
the default. Signal level mode displayed can be changed with a button press.
On the right side of signal level of outputs you can see the bus names which are assigned to
the outputs.
FX page
The Effects has 8 modules, which are 2 Modulation, 2 Delay, 2 Reverb and 2 15-band GEQ.
Each module can be inserted to an input processing channel or bus processing channel
only once. You can insert up to two effects into a bus or channel. For example reverb &
delay to create a vocal effect.
①
Effect module
Single press the effect module to open a subpage of parameter settings for this module.
Single press the close button (red X) on the subpage to exit, and return to FX page.
②
Bus selection
Single press the dropdown button, and select bus (Bus1~Bus8
，
Master L/R) from a
dropdown list. If the chosen bus has selected a FX module in the input part of the channel,
then the left frame displays selected FX modules in order of selection from left to right. If
nothing has been chosen, you could drag the FX module above to the empty frame (if the
FX module was occupied by other channel or bus, a dialog pops up ”The module can be
used only once and it is already used by **. Are you sure you want to use the module
forcibly now? Yes No”).
1
2
