![Studiomaster BR 12 SERIES Скачать руководство пользователя страница 2](http://html1.mh-extra.com/html/studiomaster/br-12-series/br-12-series_instruction-manual_1387086002.webp)
Features at a Glance.
Product Components.
Receiver Features.
The Front and Rear Panel
Operating Instructions.
The BR 12 Series from Studiomaster Professional is a Top wireless technology system engineered for the most
demanding touring environments and installations. This series of UHF wireless systems offer unprecedented
flexibility and versatility.
• UHF band frequency by Quartz locked controlled.
• Compact ,Light Weight receiver
• LED indicator [Power, Diversity (A-B), Peak] & telescopic antenna
• Extended dynamic range • Special circuit design to eliminate microphone switch ON/OFF nose.
• True Diversity Reception Mode • UHF hi-band range 720-865 MHZ
• Unbalanced 6.3mm jack & balanced XLR Output connectors. • Audio bandwidth 50Hz-15KHz
• Low battery LED indicator on the microphone. • Microphone operates with a 9 V Battery (6-8 hrs)
• Receiver operates on 12V DC through an AC adaptor.
• Output volume control on the front panel.
1. Power Switch: Turns receiver power on/off.
2. Power ON Indicator: This red light glows when the receiver is plugged into an electrical outlet and
switched on. It indicates that the receiver is on.
3. Diversity Signal Indicators: The green light of diversity A/B glows when RF (radio frequency) signals are
received from the transmitter. When A light is glowing, the channel A is being used, when B light is
glowing the channel B is being used.
4. Audio level Indicator: Audio level indicator of receiver glows according to the volume of the transmitter
when talking or singing into the microphone.
5. Volume control: Rotate this Knob to increase or decrease the volume of the receiver output.
6. Model Number of the receiver.
7. Antenna
8. Balanced Output XLR Male Socket: For obtaining balanced audio output through a 3-pin female XLR plug
9. Unbalanced Output JACK Socket: For obtaining unbalanced audio output of high or low levels, than a
¼'' phono jack
10. DC Input Socket: For connecting the DC Plug of a 12V adaptor.
POWER
AF OUT
UHF
Wireless Receiver
+
12.15V
_ _ _
1
2
BR-12
Professional Wireless Microphone
READY
POWER
ANTENNA
VOL A
2
7
10
6
5
8
4
9
3
• Receiver x 1 • Wireless Handheld Microphone or Lapel Microphone x1 • Audio Cable x 1
• AC Power adapter for Receiver x 1 • Battery (9 Volt) x 1 • Instruction Manual x 1
2