2. All enclosures fitted with 3 deg splay angle –
total vertical directivity 30°.
13
9. VERTICAL DIRECTIVITY (COVERAGE AREA)
With different Splay angles we can cover required area. The overlapping angle can be adjusted by
means of the combination of different splay angles using holes on Joining Plate as explained in point 8.5. The horizontal directivity
angle is fixed at 120 degrees. Please see below different coverage areas.
In below configuration of each splay angle,
1.
First speaker is at 4.5° inclination w.r.t. fly bar which is to be used for long throw. On front, small joining
Configuration A -
plate are used & on rear big joining plate are used.
2.
- Front speaker is parallel to fly bar. This configuration can be used for medium & short throw. On both
Configuration B
ends, small joining plate are used.
9°
1. All enclosures fitted with 0 deg splay angle –
total vertical directivity 9°.
Long Throw
A
A
B
B
Long Throw
Medium &
Short Throw
Medium &
Short Throw
9°
4.5°
30°
4.5°
30°
