8
7.cleansing filter net
turn off the water supply
Close
Close
Clean the filter net
Install filter and
tighten plug
Turn on the water
Close
unscrew the plug and
remove the filter screen.
8. Removal and installation of
Bidet seat
Bidet seat removal
（1） Turn off the
water supply.
(2) Open the cover & seat. Pull out the
rubber pads on both sides of the Bidet seat,
use the Phillips screwdriver to remove two
screws, and remove the gasket.
(3) Pull the complete Bidet seat up, remove the
clamp hose and disassemble the two braided
hoses by wrench. Then remove the Bidet seat
and place it on the floor correct side up.
6.Replacement of power
Press the button of the
battery box.
When the battery box
pops up, pull out it.
Unplug and take out the
battery box.
Replace
Replace batteries
Put back the battery box
and plug in.
Put back the battery box,
and press the button of the
battery box
Unplug
Insert
Tip:
※Used up
batteries should
be thrown into
corresponding
type of garbage
cans
