Congratulations on your purchase of the PLS-49
Piano Learning System!
We know you're going to enjoy many hours of pleasure learning how to play.
Please follow these simple instructions carefully to get "up and running" as soon
as possible with a minimum of trouble.
TO START:
POWER: Plug the enclosed AC power adaptor (YA-1) into the DC
input socket located on the left side panel of the CMK-49 keyboard,
and plug it into the wall.
Check to see that the LED indicator inside the power switch located
on the left side (top) of the keyboard is lit. If not, try pressing the
power switch to turn the CMK-49 on.
MIDI CONNECTIONS: Your Studiologic CMK-49 MIDI Keyboard
controller has a MIDI OUT plug located on the left side panel. (It's
the large black round one with the five prongs).
The enclosed PC MIDI Cable with Joystick Extender has two
round black plugs, labeled IN and OUT, respectively. Please plug
the connector labeled IN into the CMK-49's MIDI OUT socket and
then connect the 15 prong connector on the opposite end of the
cable into the "Joystick Port" on your soundcard (located in the
back of your computer).
This special cable allows you to leave your CMK-49 keyboard and
joystick connected at the same time, so if you have a joystick
already installed, please plug it in to the joystick extender provided.
Note: The MIDI OUT Connector Plug on the PC MIDI Cable
with Joystick Extender will not be used in this particular
application. It is provided if you wish to add an additional
external sound source (synthesizer) to your computer music
setup at a later date.
SOFTWARE: Once you have completed the above steps, you
should insert Voyetra's Discovering Keyboards/MIDI
Orchestrator Plus CD-ROM into your computer.
In most instances, the CD should "auto-run" and you will be
presented with the install screen shortly after you insert the CD.
Follow the on screen instructions carefully to install your Voyetra
Software. When asked, your serial number can be found on the
enclosed Voyetra Registration Card.
