Numa X Piano
24
Numa X Piano
24
Global settings
Press the
Global setting button
to enter or exit from the
Global settings
page.
Global settings
button
Functions list
The list includes all settings that work regardless Programs. These settings remain saved even when you turn the
instrument on/off. Use the Main Encoder up/down to scroll the parameters and rotate to change the value.
TRANSPOSE
Transpose the instrument to any other key.
Rotate the encoder to set the desired transposition of
+/- 12 semitones.
TUNING
This function allows to “tune” the instrument, in case
you have to play along with another instrument that
is not tuned to the standard (A = 440 Hz). The availa-
ble range is 427.5 - 452.9 Hz
LOCAL CONTROL
If you set
LOCAL OFF
, Numa X Piano does not send the
notes played on the keyboard directly to the internal
Sounds, but only via USB-MIDI to avoid unwanted rep-
etitions when using external software applications.
This command is also received via MIDI.
COMMON CHANNEL
This function lets you use Numa X Piano in
single
channel
mode using the selected channel (from 1
to 16). It only works on USB MIDI port. Using Com-
mon Channel you can send/receive MIDI parameters
(notes, controllers, etc...) in your DAW and panel set-
tings as well. You can also filter some MIDI message
types:
Program Change, Control Change and Aftertouch
(see following).
GLOBAL SETTINGS
FIRMWARE V1.01
0
440 Hz (A)
NORMAL
PEDAL 1/2
CONTINUOS
16
SEND/RECEIVE
SEND ONLY
USB
ZONE 4
OFF
TRANSPOSE
0
TRANSPOSE
TUNING
VELOCITY CURVE
PROGRAM -/+
PEDAL 4 TYPE
COMMON CHANNEL
PROGRAM CH.
CONTROL CH.
MIDI MERGE FROM
MIDI MERGE TO
MIDI MERGE FILTER
FACTORY RESTORE
STICKS CALIBRATION
Firmware version and update
To update the Firmware visit
www.studiologic-music.com/support/numa_x_piano/
and follow the instructions.
Firmware version
PROGRAM CHANGE
Filter
Program Change
messages when
Common
Channel
is active. Available settings are:
OFF, SEND, RE-
CEIVE, SEND/RECEIVE
.
CONTROL CHANGE
Filter
Control Change
MIDI messages when
Common
Channel
is active. Available settings are:
OFF, SEND,
RECEIVE, SEND/RECEIVE
.
AFTERTOUCH
Filter
Aftertouch
MIDI messages when
Common
Channel
is active. Available settings are:
OFF, SEND,
RECEIVE, SEND/RECEIVE
.
VELOCITY CURVE
You can select different velocity curves, according to
your taste and playing technique. There are 4 factory
curves:
SOFT, NORMAL, HARD, FIXED
.
Fixed setting value can be set in
VELOCITY FIXED
parameter.
VELOCITY FIXED
Set the value when
Velocity Curve
is set on
FIXED
(range 1-127).