STA 01-397 U/A 7
Assembly Steps: U
1. Tighten the Angle adjustment lever.
[refer to page 5 ]
2. Attach small accessory shelf to a 5/8th
inch spigot into base adapter and tighten
the base adapter securing knob. [refer to
page 5 ]
Or
3. Attach small accessory shelf with a 3/8th
inch 16 thread standard tripod head screw
[the same screw used to connect a ball
head to a tripod] [refer to page 5 ]
4. Place the notebook or device onto the
shelf and determine which multi-positon
slot is best suited. Adjust the position and
tighten the clamp securing knob until the
notebook or device is secure. [refer to page
5 ]
