Studio Titan STA 01-350MK2, Руководство пользователя, Страница: 4 / 18

STA 01-350MK2 series 4
Intended use:
This product is intended for use by professional
and commercial photographers in a studio envi-
ronment with a high ceiling. The wheels are
designed to be used indoors on a floor that is
smooth, hard, flat and unobstructed. The Studio
Stands with internal counterweight are designed
to be used at all times with a load (Camera or
laptop shelf or both).
CAUTION: This product
is not recommended for use by hobbyists or in a
household environment with a low ceiling or
carpeted floors. Carpeting or pitted surfaces are
not recommended because of the increased roll-
ing resistance which can cause the stand to tip
over. If the surface is not ideal, the stand must
be moved with
CAUTION , very slowly, using
both hands one at the top and the other at the
bottom to steady the stand in order to prevent
the stand from tipping over. If the surface is not
ideal, lower the load to waist level before mov-
ing the stand. We also recommend the use of a
sandbag or weight attached at the base when
conditions are not ideal to prevent tipping over.
Ultimately it’s the users responsibility to under-
stand how the stand operates and to use the
stand within its specification limits, as intended
to insure their own safety and the safety of
their equipment. It is also recommended to use
a short tether cable to secure the camera to the
stand in the event that the head, head plate,
attachment stud or camera adapter plate comes
loose or fails. Some assembly is required, we
recommend using an assistant during the initial
product assembly. Please read all documenta-
tion prior to assembly.