background image

Issue 1, September 2016 

Model 380 User Guide 

Page 18 

Studio Technologies, Inc. 

PoE-enabled Ethernet switch connecting a 

personal computer to the Model 380. Then 

by using the appropriate ARP command  

the required “clues” can be obtained.

Optimizing Network 

Performance

For best Dante audio-over-Ethernet per-

formance a network that supports VoIP 

QoS capability is recommended. This can 

typically be implemented on virtually all 

contemporary managed Ethernet switches. 

There are even specialized switches that 

are optimized for entertainment-associated 

applications. Refer to the Audinate website 

(www.audinate.com) for details on optimiz-

ing networks for Dante applications.

Application Firmware Version 

Display

As part of the Model 380’s power-up  

sequence the unit’s application firmware 

(embedded software) version number can 

be displayed. This is useful when working 

with factory personnel on application sup-

port and troubleshooting. Before connecting 

the PoE-enabled Ethernet cable, press and 

hold the talkback button. Then connect the 

Ethernet cable. Upon application of PoE 

power the Model 380 will not go through  

its normal power-up sequence but instead 

will display the firmware version. The LED 

associated with the talkback button will 

“flash” green in color to display the major 

version number and then “flash” orange to 

display the minor version number. Then the 

LED will remain off until the talkback but-

ton is released. Once the button has been 

released normal operation will then take 

place. As an example of what would be a 

typical firmware display, if the talkback but-

ton’s LED “flashes” green once followed by 

the LED “flashing” orange thrice it would 

indicate that application firmware version 

1.3 is present in the Model 380.

Application Firmware Update 

Procedure

It’s possible that updated versions of the 

application firmware (embedded software) 

that is utilized by the Model 380’s proces-

sor (microcontroller or MCU) integrated 

circuit will be released to add features or 

correct issues. Refer to the Studio Tech-

nologies website for the latest application 

firmware file. The unit has the ability to load 

a revised file into the MCU’s non-volatile 

memory by way of a USB interface. The 

Model 380 implements a USB host function 

that directly supports connection of a USB 

flash drive. The Model 380’s MCU updates 

its firmware using a file named 

m380.bin

.

The update process begins by preparing 

a USB flash drive. The flash drive doesn’t 

have to be empty (blank) but must be in 

the personal-computer-standard FAT32 for-

mat. Save the new firmware file in the root 

directory with a name of 

m380.bin

. Studio 

Technologies will supply the application 

firmware file inside a .zip archive file. While 

the firmware file inside of the zip file will ad-

here to the naming convention required by 

the Model 380, the name of the zip file itself 

will include the file’s version number. For 

example, a file named 

m380v1r3MCU.zip

 

would indicate that version 1.3 of the ap-

plication firmware (

m380.bin

) is contained 

within this zip file.
Once the USB flash drive is inserted into 

the USB interface, located on the main  

circuit board under the cover, the unit  

must be powered off and again powered 

on. At this point the file will automatically 

load. The precise steps required will be 

Содержание M380






















Отзывы: