Studio 54 Alexander 10T, Инструкция пользователя

Страница: 15 / 32

ALEXANDER 5T - 10T - 15T
Ed.12/2011
15
N.B. PULL OUT THE PROBE FROM THE TREATED FOOD TAKING IT UP
BY THE RIGID PART OF IT AND NOT PULLING IT BY THE CABLE. THE
WRONG ACTION CAN CAUSE ITS BREAKING, AND ITS SUBSTITUTION
WILL NOT BE DONE UNDER WARRANTY.
9.
ROUTINE MAINTENANCE
In order to make ad adequate maintenance of the appliance, the user, the
maintenance man or the non-specialized staff must firstly keep in mind the
elementary safety rules quoted on paragraph n. 1 GENERAL INFORMATION.
Then, it is also compulsory to not remove the safety devices and the protections
during the routine maintenance.
OTHERWISE, THE PRODUCING COMPANY DECLINES ANY
RESPONSIBILITY FOR DAMAGES OR ACCIDENTS RESULTING FROM THE
FAILURE TO COMPLY WITH THE ABOVE-STATED OBLIGATION.
Considered the previous rules, the cleaning of the cooled storage must be done
daily, in order to guarantee the best quality and the perfect sanitariness of the
treated products. Use water and non-abrasive cleansing agents. Wash and rinse
using a cloth or a sponge.
N.B. NO SHARP OR ABRASIVE INSTRUMENTS, NO SOLVENTS OR
DILUENTS
For a better air circulation, keep clean also the condensing unit (part 10) removing
from its wings dust etc. To reach the condensing unit, you must pull out the plug
from the electrical socket, and unscrew the front panel (part 14) paying attention
on not putting in excessive traction the electrical connections. Use a vacuum
cleaner in order of not having a dispersion of dust. Do not scrape with sharp or
abrasive instruments.
At the end, reassemble the front panel closing the fixing screws.
The defrosting water goes inside a tank in the bottom of the blast chiller/freezer.
In case of extraordinary maintenance to the refrigerating system, it is possible to
remove the back panel, and also the lateral panel if necessary. Such operations
can be made exclusively by refrigerator or authorised technicians, and only after
having pull out the plug from the electrical socket.