Studer Vista 5 M3 Скачать руководство пользователя

Страница: 336 / 564

Vista 5 M3 Digital Mixing System

5-40 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.7 Control Modes

There are four Control Modes used in the AutoTouchPlus mix system:

•

Read

•

Write Enable

•

Trim Enable

•

Isolate

Each automatable control within the system is always in one of these four

modes.

Rule-Based System

As mentioned before, the system is based on a set of consistent rules that

pertain to the behavior of each mode or function. It is the consistency of these

rules that allows the system to be simple to understand, yet very deep and

powerful. The key to using the system is simply to learn the rules. The rules

define how an control or feature will function under a given set of conditions.

The conditions that define the exact function of each mode are determined

by the selection of other functions, selected options, and record status. With

this in mind, it may be helpful to think about Control Mode as the primary

function which maybe modified to yield the precise operation the user desires.

In a few cases the basic rules will be broken, but these will be clearly noted.

Independent Control Modes

Different channels may be in different automation modes. For example, some

channels may be in

Write Enable

while others may be in

Trim Enable

. In

addition, different controls within channels may be in different modes. For

example the fader may be in

Trim Enable

, while the mute is in

Write En-

able

, and the rotaries are in

Read

. Any combination is possible.

Read Lock

With

Read Lock

engaged, all controls are placed in Read mode. All mode

changes are locked out, Audition mode is defeated, and only written values

will be heard. In this regard,

Read Lock

over-rides Control Mode selections.

Note

In describing the behavior of each Control Mode it is assumed that the

Mix

function is active and timecode is running. If

Mix On

is not active then

all controls behave as if there were in

Isolate

mode.

Document Note

The next several chapters will provide a set of basic rules for each Control

Mode. A set of conditions and options that further define the mode’s opera-

tion will also be provided. The most pertinent conditions and options for each

mode will be discussed, but it would be impractical to list every permutation.

Some system conditions and options will be discussed as stand alone elements

and their effects upon other areas will be noted.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды