Studer Vista 5 M3 Скачать руководство пользователя

Страница: 324 / 564

Vista 5 M3 Digital Mixing System

5-28 AutoTouchPlus

Document generated: 28.08.13

SW V4.9

5.5.1.2

Active Pass

The Active Mix Pass provides the Read Mix data for subsequent Record Mix

Passes.

When a Mix Pass becomes Active the following events occur:

• In the AutoTouchPlus window:

- The name and assigned number of the Mix Pass appears in the

Pass:

field

- The name of the Mix Tree appears in the

Mix:

field

- Any notes belonging to the pass appears in the

Notes:

field

- The Green Light illuminates above the associated position in the Mix

Pass Stack

• In the Mix Tree window:

- The Mix Pass is highlighted in green

The Active Mix is normally the mix on the top of the stack. Refer to

chapter

5.6.1

for details regarding the Mix Pass Stack.

5.5.1.3

Mix Tree Display Modes

‘Hide Tree’/’Show Tree’ Button

AutoTouchPlus may be operated with or without the Mix Tree displayed. The

Mix Pass Stack will be available in either case and can be used without the

Mix Tree if desired (as in V2.5). To facilitate working without the Mix Tree,

it may be hidden so that all Mix management can be done within the Mix

Pass Stack. The Mix Tree is hidden by clicking the

Hide Tree

button in the

AutoTouchPlus window.

The Mix Tree will disappear as indicated below and the

Hide Tree

button

changes to

Show Tree

. At any time, the Mix Tree may be made fully visible

again by clicking the

Show Tree

button.

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды