Compact Infinity Core
Compact Infinity Core 1
8
Document generated: 13.06.18
2.8
Session Configuration Tool
The Infinity Core uses almost the same concept of user configurable channel/
bus structures (Session Configurations) as the SCoreLive.
In this chapter, the most obvious and most important differences to the Ses-
sion Configuration Tool of the SCoreLive are explained.
Differences to the Session Configuration Tool of the SCoreLive
The Session Configuration Tool of the Infininty Core is not generating DSP
program code - as needed for the SCoreLive - but it is generating a number
of “simple” .xml files.
Out of this fact, two major advantages evolve :
1.
No licence
is required for the compiling process
2. To generate a Session Configuration takes only very little time
The resulting files of a compiled Session Configuration (“Generate All”) are
three new files :
• the XML Configuration :
Configname.xml
• the Mixer Cloud paths :
Configname-MixercloudPaths.txt
• the VMC Mappinginformation :
Configname-VmcMappinginformation.xml
•
CoreConfigTool.sCore
•
CoreConfigTool.ini
CoreConfigTool.sCore
è
This file must be renamed to .ini when used with SCoreLive systems.
CoreConfigTool.ini
è
This file is ready to be used with the Infinity Core systems.
To doublecheck whether the correct version of the file is active, the file can
be opened with a text editor and the entry ‘
CoreType= ’
can be verified.
When the Session Configuration Tool is set-up for the Infinity Core, it can
be started with
C:\CoreCfgTool\CoreCfgTool.exe
.or with the shortcut on the
desktop refering to this file.
Then name of the Session Configuration Tool then is “
ICoreCfgTool
” -
which is shown on he very top of the program window - and the GUI of the
tool looks as shown below.
Setup
The Session Configuration Tool for the
Infinity Core
actually is the very
same Session Configuration Tool as used for the SCoreLive (starting from
SW 5.2.00). Whether it is used for the SCoreLive or for the
Infinity Core
is
decided by the CoreConfigTool.ini file.
There are two templates of the .ini files in the folder
C:\CoreCfgTool
:
