E-7
Install / Remove Batteries of Remote
Remove the battery compartment cover on the back of your remote
by
carefully sliding to open. The battery cover can then be lifted away. Fit
the correct batteries (not included), referring to the polarity markings.
Finally, replace the cover.
Notes:
•
Batteries shall not be exposed to excessive heat such as placing
under the sunlight or near a fire.
•
Please make sure the batteries are installed with their correct
polarities.
•
Do not mix old and new batteries.
•
Use only the same type of batteries.
•
Do not dispose of the batteries in fire, battery may explode or leak.
•
Do not recharge a non-rechargeable battery.
POWER SOURCE (AC ADAPTOR ONLY)
The unit is powered by an external 120V AC adaptor with an output of
DC
12V / 6A
.
The unit is also equipped with a battery back-up system for the clock that is powered by
2 x AAA (UM-4) batteries (Not included).
POWER CONNECTION
1. Firmly and securely insert the DC plug of the adaptor into the DC IN JACK on the back of
the unit.
2. Plug the AC power cord of small plug side to AC input socket of adaptor.
3. Plug the AC power cord of AC plug side into the 120V AC outlet. The unit is powered up
in standby mode, three charging indicators will light briefly and you see the display turn
on
and show
12:00 flashing.
Содержание SB5050
Страница 1: ......
