45
46
47
become alarmed when polishing or waxing if a slight amount of color appears on the cloth. This is a natural condition.
Alcohol, anti-freeze mixtures containing alcohol, and calcium chloride or other chemical mixtures used to melt snow and ice or to
settle dust should be flushed with water as soon as possible in order to avoid damage to the enamel finish and chromium parts.
Washing the Car
When washing the car, first saturate all foreign substances on the finish with cold water. Then use a clean sponge and running water for the
removal of dirt. Dry the body with a clean, damp chamois skin, using a straight horizontal or vertical motion, rather than a circular motion.
It is important that a different sponge and chamois skin be used on the body from that used on the chassis.
Chromium and nickel plated finishes are of a perishable nature and will deteriorate if not properly cared for. These parts should be kept
clean and free from dirt and foreign matter. To clean chromium plated parts, use clear water and a clean cloth. To protect the finish after
the parts are cleaned, apply a coating of paste-type body wax.
For further details on chrome plated parts, see the card placed in the
package compartment.
Care of Cloth Upholstery
Clean upholstery means not only a better looking automobile but gives longer wear and affords greater comfort and enjoyment.
The use of a vacuum cleaner and a thorough brushing of the upholstery and headlining (with the nap or pile) will usually brighten the interior
noticeably. Remove the cushions from the car and brush to remove foreign particles from the fabric.
Studebaker Fabric Cleaner (available through Studebaker dealers) is effective in removing all types of stains and does not harm the
upholstery.
Seat and side upholstery can be washed safely with soap and water. Use lukewarm water and a neutral soap. The suds should be good
and frothy, not watery. Apply in moderate quantities with a damp cloth, sponge, or soft brush. Remove soap suds with a clean, damp cloth
or sponge, then wipe the surface several times with a dry cloth. While the material is still damp, brush it lightly with a whisk broom or brush
of medium stiffness. Permit air to circulate freely over the wet upholstery. When dry, brush again to loosen any minute matting. When
brushing, always brush fabric with the lay of the pile or nap.
Cleaning Leather Upholstery
Leather upholstery may be cleaned with a soft sponge and saddle soap. Make a light suds with lukewarm water and saddle soap. This
type of soap is especially suitable for cleaning leather and leaves the surface soft and pliable.
Rinse the sponge occasionally in clean water. After completing the cleaning operation, use a clean, soft cloth to polish the surface of the
leather.
Cleaning Rubber Parts
Studebaker Chromium Cleaner (powder type AC-1464) is recommended for cleaning white sidewall tires. Studebaker Black Rubber
Finish is recommended for black tires and all black rubber parts.
Care of the Convertible Fabric Top
The life of any convertible top can be materially lengthened if care is taken to
lower the top only when it is dry. Never operate the top
motor when the car is in motion.
Tops used on Studebaker convertible models are made of a two-ply material. The face of the black top is made of cotton and rayon. The
face of the light-colored tops used on some Studebaker convertible models is made of
Orlon
acrylic fiber and will not shrink, mildew, or
stretch as a result of exposure to the elements. These facing materials are bound to a cotton backing material.
Cleaning
Traffic grime and most other soiling may be removed by washing the top with a sudsy mixture of mild (neutral) soap and
warm water. A soft brush may be used if necessary. Strong solvents, naphtha, or carbon tetrachloride are not recommended for cleaning
this fabric.
Rear Windows
of convertible tops are made of a clear plastic material. They should not be wiped while dry since the abrasive
particles in the dust will tend to scratch the surface of the plastic. Clean the convertible top rear window by flooding it with cold water and
wiping off the dirt with a soft cloth or sponge during the flooding process.
