Connecting the Welding Leads
1. Connect the stud gun weld cable into the gun terminal socket on the front of the welding unit. The
cable end plug has a flat which aligns with a dot on the panel mount socket. Secure the connector
into the panel mount socket, and then turn it clockwise until it locks into proper position.
Failure
to properly make these connections could result in damage to the connectors.
2. Connect the weld gun control cable into the center socket connector. The control cable plug has a
large pin and a small pin that match the socket on the unit. Push the plug firmly into the socket
and twist clockwise to secure the plug into the correct position.
3. Connect the ground clamp into the ground terminal socket on the front of the unit, this connec-
tion is identical to step 1.
Connecting the Ground Clamp
1. Prior to securing the clamp, make certain that the contact area is free of rust, paint, grease, or any
other impuri�es to ensure a good ground conn��n.
2. �W
ach the clamp of the welding ground lead to the work piece.
SETUP AND WELDING
Stud Gun
Control
Cable Conn��n
Stud
Gun
Weld
Cable Conn��n
Ground
Cable Conn��on
9
WWW.STUDWELDPROD.COM
800-252-1919
