STUCCHI ST1, Руководство по эксплуатации и обслуживанию

Страница: 21 / 24

ST1
6.2 Replacing the electronic control board
Please follow the procedure indicated below to replace the electronic control board:

Remove the upper closure casing of the machine

Remove the cover that contains the electronic control board

Disconnect the boards' power connector

Disconnect the faulty electronic board fastened to the upper surface of the extraction unit

Replace the board verifying its correct position and fixing

Connect the connector to the board

Re-fit the cover and upper casing of the machine fixing it using the appropriate screws.
6.3 Emptying the powder container
To empty the powder container unhook the lever stops (1) that fasten the container to the filter
body.
The disposal of filtration powders must occur in accordance with the local regulations in
force regarding the disposal and/or recycling of industrial waste.
Before re-assembling the container under the filter body, check the seal condition. After positioning
the container, lock it using the lever stops.
Locking levers (1)
Powder container
Illustration for presentation purposes only
Use and Maintenance manual 21