Transport, Storage and Disposal
4
Transport, Storage and Disposal
4.1
Unpacking and inspection on delivery
1. Unpack the device when received and inspect it for trans-
port damage and completeness.
2. Check that the material speci
fi
cations on the name plate
(see packing box) and order/sizing data match.
3. Report any transport damage to the manufacturer immedi-
ately.
4. If
fi
tted immediately:
Dispose of packaging material
according to local regulations.
–
If
fi
tted at a later point: leave device in its original pack-
aging.
4.2
Transportation
Device should preferably be transported in the original
packaging.
4.3
Storage
NOTE
Material damage due to inappropriate storage!
Store the device properly.
1. Make sure the storage room meets the following condi-
tions:
–
Dry
–
Frost-free
–
Vibration-free
–
Not in direct sunlight
–
Storage tempe10 °C to +60 °C
2. Device should preferably be stored in the original packag-
ing.
4.4
Disposal
Plastic parts can be contaminated by poisonous or radioac-
tive media to such an extent that cleaning will not be suf
fi
-
cient.
WARNING
Risk of poisoning and environmental damage from
medium.
Use personal protective equipment when carrying out any
work on the device.
Prior to the disposal of the device: Neutralize residues of
medium in the device.
1. Remove battery and dispose of in accordance with local
regulations.
2. Remove electronic parts and dispose of in accordance with
local regulations.
3. Dispose of plastic parts in accordance with local regula-
tions.
6
DFM 165 – 350
BA-2016.08.09 EN
300 458
