Stuart Turner Stuart SPU 130 Mini, Инструкция по установке, эксплуатации и обслуживанию

Страница: 16 / 32

- 16 -
Cont ...
5.23 Boiler interlock connections:
The circuit connected to the relay is limited to 5 Amps, 230 V a.c.
maximum. The Installer MUST fit a 5 Amp fuse in the circuit to the
alarm relay to protect the SPU Mini from damage.
For connection of output relays follow the steps and images below:
1) Remove the required green connector from the right hand side of the
control board.
2) Strip 6-8 mm insulation from the end of the connection wire (Max 1.5 mm
2
CSA).
3) Insert wire into connector and screw down terminal screws to secure
(0.6 Nm max.).
NO
Boiler Interlock
Fig. 13
Fig. 14
Fig. 15
Fig. 16