Operating Manual
5.2.9.3. Tab
„Events“
Only active when the option event is activated in the datalogger
1
2
3
4
1
Setting this flag activates the option “Events” if the datalogger is switch on. This function can
be used if the datalogger is connected with a communication module and events have to be
transmitted
automatically.
2
Event for channel:
Pressure:
The event is considered for pressure
Temperature:
The
event
is
considered
for
temperature
3
Upper:
The DL does not give an event until the pressure exceeds the specified upper value. The upper
and the lower value which can be entered correspond to the yellow marked field. A new
event is only given if the event has been confimed by the datalogger software and if the
pressure /temperature has fallen below the lower value.
4
Lower:
DEB004H
Seite 46 von 68
14. März 2006
