manualshive.com logo in svg

Stryker Visum, Руководство по эксплуатации

Поделиться
Скачать
Stryker Visum Скачать руководство пользователя страница 8

8       

S

3. Symbol Definition

Warnings

  

When this symbol appears on a device, it refers the user to the Operations and Maintenance 
manual for important safety information. When it appears in the manual, it is meant to alert 
the user to the presence of important safety, operating, and maintenance instructions.

General warning.

    

A lightning bolt indicates the presence of hazardous voltage. Refer all service to authorized 
personnel. 

Warning: Failure to properly install the screw(s) above can result 
in the attached component/equipment falling

Packaging/Labeling

Denotes the manufacturer of the 
device.

Denotes the manufacturing date.

Denotes European Representative.

Denotes product/part number.

Denotes product/serial number.

Denotes lot or batch number.

Denotes compliance to European 
Community Directive 93-42-EEC.

For U.S. audience only - Caution: 
Federal Law (USA) restricts this 
device to sale by or on the order of a 
physician.

Denotes relative pressure limits.

Denotes humidity limits.

Denotes temperature limits.

Denotes quantity.

Device

This symbol is intended to refer the user to important safety operating and maintenance 
(service) instructions in the literature accompanying the product.

Indicates hot surfaces.

Содержание Visum













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды