Stryker Turbo 5, Руководство пользователя

Страница: 7 / 12

DRAFT
7
Instructions
Color Code Your Radios
NOTES:
• The radios in this set are digitally matched and must be
retained as a set. Color ID labels are provided so you can
color code each radio in the set with the same color labels
for quick reference.
• If your facility uses multiple sets of radios, select a unique
color to differentiate each set. If colors are duplicated,
write on the labels to further identify matched set.
1. Select one label set. For example, red.
2. Apply the label marked MASTER on the master
radio. Select the labels marked REMOTE from the
same label set and apply them to the remote
radios.
Charging the Radios and Supplemental Battery
CAUTIONS:
• Do not substitute the AC charger/adaptors or power strip
as damage may occur to the battery.
• Do not exceed 16 hours of charging time. For optimum
battery performance and life, do not leave a radio or
supplemental battery connected to the AC charger/adaptor
after reaching full charge.
NOTE: Radios must be turned off while charging.
1. Plug the power strip into an AC wall
outlet.
2. Turn the power strip on. The toggle
switch will illuminate.
3. Plug the AC charger/adaptors into
the power strip receptacles.
4. Ensure each radio is turned off.
5. Plug the AC charger/adaptor
connectors firmly into each
radio and/or supplemental
battery jack. The charge
indicator will illuminate to
indicate a charging
connection.
6. Allow radios and/or
supplemental batteries to
charge for a minimum of
12 hours.