3
Portable Warmer Operation
INTRODUCTION
This manual is designed to assist you with the operation of the Thermaltek
300 ”Plus” Portable Warmer.
Read it thoroughly before using the equipment. The 300 ”Plus” Portable Warmer is for use by qualified medi-
cal personnel only.
SPECIFICATIONS
Dimensions: Depth x Width x Height
13” x 13” x 18” (including handle & support
post)
Dimensions (with Base): Depth x Width x Height
22” x 22” x 42”
Weight
10.5 pounds
Weight (with Base and Overlay Bag)
22 pounds
I.V. Pole Attachment System (I.V. Pole Diameter)
5/8” – 1 3/8”
I.V. Pole Socket Support Post (I.V. Pole Socket Diameter)
3/8” – 1/2” (without adaptor)
Electrical Requirements
115 VAC, 60 Hz, 8.0 Amp
NOTE
A ground connection is available on the 300 ”Plus” Portable Warmer. It is located next to the power cord and
is marked with the symbol
.
WARNING / CAUTION / NOTE DEFINITION
The words WARNING, CAUTION and NOTE carry special meanings and should be carefully reviewed.
WARNING
The personal safety of the patient or user may be involved. Disregarding this information could result in injury
to the patient or user.
CAUTION
These instructions point out special procedures or precautions that must be followed to avoid damaging the
equipment.
NOTE
This provides special information to make maintenance easier or important instructions clearer.
CLEANING
Be sure warmer is unplugged before cleaning. Hand wash all surfaces of the warmer with a damp cloth and
mild detergent. Dry thoroughly.
The warmer hose material is a non water permeable 200 denier urethane coated nylon. It can be cleaned
by wiping it with a standard hospital cleaning/disinfecting solution.
CAUTION
Do not steam clean or hose off the 300 ” Plus” Portable Warmer. Do not immerse any part of the warmer.
Some of the internal parts of the warmer are electric and may be damaged by exposure to water.
To reduce the risk of shock, DO NOT REMOVE COVER. Refer servicing to qualified service personnel.