Stryker Prime TC, Руководство по обслуживанию

Страница: 14 / 64

S Se errvviicce e
S Se ea att b ba acckk rre em mo ovva all
T To oo ollss rre eq qu uiirre ed d::
• 3/16” hex wrench
• 3/8” drive torque wrench (in-lb)
P Prro occe ed du urre e::
1. Apply the brake.
2. Using a 3/16” hex wrench, remove the four flat head cap screws (A) and adaptors (B) to remove the seat back (C) from
the chair frame. Save the screws, adaptors, and seat back (Figure 3).
A
B
A
B
Torque item A
to 70 ± 10 in-lb
Torque item A
to 70 ± 10 in-lb
C
F Fiig gu urre e 3 3 –– S Se ea att b ba acckk rre em mo ovva all
3. When reinstalling the seat back, use a 3/16” hex wrench to reinstall the four flat head cap screws (A) and adaptors (B)
(removed in step 2) to secure the seat back (C) to the chair frame. Using a 3/8” drive torque wrench, torque the screws
to 70 ± 10 in-lb.
4. Verify proper operation before you return the product to service.
S Se ea att b ba acckk rre ep plla acce em me en ntt
T To oo ollss rre eq qu uiirre ed d::
• 3/16” hex wrench
• 3/8” drive torque wrench (in-lb)
EN 10 1460-009-002 Rev B.0