Stryker Isolibrium 2972 Скачать руководство пользователя страница 7

Страница: 7 / 78

IInnttrroodduuccttiioonn ffoorr sseerrvviiccee

This manual assists you with the service of your Stryker product. Read this manual to service this product. This manual

does not address the operation of this product. See the Operations Manual for operating and use instructions. To view your

Operations Manual online, see https://techweb.stryker.com/.

PPrroodduucctt ddeessccrriippttiioonn

Stryker Model 2972 IIssoolliibbrriiuum

m® is a powered support surface with features that provide Pressure Redistribution, Low Air

Loss, and Lateral Rotation. IIssoolliibbrriiuum

m is for use with the IInnTToouucchh® (revisions 4.0 or higher software) bed frame.

IIssoolliibbrriiuum

m and IInnTToouucchh are an integrated bed and surface system that caregivers use to assist in patient care.

IInnddiiccaattiioonnss ffoorr uussee

The Stryker Model 2972 IIssoolliibbrriiuum

m support surface is intended to assist in the prevention and treatment of all pressure

injury or pressure ulcers (includes all stages, unstageable and deep tissue pressure injury). As a recommendation,

healthcare professional should complete a clinical evaluation of risk factors and skin assessments. The intended users is

both healthcare HCPs (nurses, nurse aids, and medical doctors), transporters, and human patients. This product is for use

by human patients in a health delivery organization (HDO).
The IIssoolliibbrriiuum

m patient-specific immersion is intended to assist in the management of microclimate of the patient’s skin,

patient repositioning, and the support in prevention of early mobility and pulmonary complications.
The IIssoolliibbrriiuum

m powered support surface is not intended for use in or with:

• Oxygen rich environments
• Sterile environments
• Home care or long-term care facility settings
• Behavioral health populations

CCoonnttrraaiinnddiiccaattiioonnss

IIssoolliibbrriiuum

m is contraindicated for use on patients with:

• Unstable fractures
• Unstable spinal cord injuries

EExxppeecctteedd sseerrvviiccee lliiffee

IIssoolliibbrriiuum

m support surface has a five year expected service life under normal use, conditions, and with appropriate periodic

maintenance.
IIssoolliibbrriiuum

m covers (top and bottom) have a two year expected service life under normal use, and conditions.

2972-009-002 Rev AA.0

Содержание Isolibrium 2972















































































Результаты поиска

Содержание Isolibrium 2972

Отзывы:

Похожие инструкции для Isolibrium 2972

Бренды по названию

Популярные бренды

Stryker Isolibrium 2972, Руководство по обслуживанию

Результаты поиска

Содержание Isolibrium 2972

Отзывы:

Похожие инструкции для Isolibrium 2972

Бренды по названию

Популярные бренды