manualshive.com logo in svg

Stryker Core 5400-50, Инструкция по эксплуатации

Поделиться
Скачать
Stryker Core 5400-50 Скачать руководство пользователя страница 16

17

65000

SABER DRILL

Coring Tool

To Select Settings:

The HOME screen is where most user interaction will  take place.  Up to three handpieces may be displayed on the
screen simultaneously.  When the console is initially turned on, the console settings are factory default settings until a
user preference file is selected or the settings are manually modified.

Figure 7.  Home Screen - Overview

65000

SABER DRILL

1520

FORMULA HANDPIECE

40%

CORE HIGH TORQUE

Coring Tool

ACL

Attached Handpieces

Three handpieces may
be attached to the
console and two may
be operated simulta-
neously.

Handpiece Operating Area

View and modify key
handpiece settings.

Console Operating Area

Access key console
functions.

View User Preference File Name

View name of file that contains
handpiece settings for a specific

procedure, for example, ACL
(Anterior Cruciate Ligament)
surgery.

View Handpiece Name

View name of active
handpiece.  Three
handpieces may be
connected and displayed.
Two powered handpieces
may be operated from the
same console,
simultaneously.

View Cutting Accessory or
Attachment  Name

View cutting accessory or
attachment name if the
handpiece, accessory and/or
attachment have been
selected or have recognition
capability.

View Option Settings

View option settings such as irrigation,
footswitch control, and fixed or variable RPM
(revolutions per minute).  All of these settings
may be modified.

NOTE:

If the console screen is touched in two places simultaneously, unintended button activation may result.

Содержание Core 5400-50






































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды