Stryker 2031, Руководство по обслуживанию

Страница: 38 / 185

page 4–11
Optional Inverter Protection Features and Voltage Points
The optional Epic+ inverter has several features to prevent internal damage:
1. Low Battery Voltage – If the battery voltage at the inverter drops below the low voltage cut–off, an alarm
will sound and the inverter will shut off. When battery voltage increases to 95% of nominal battery voltage,
the inverter will restart.
2. High Battery Voltage – If the battery voltage input rises above the high voltage cut–off, the inverter will
shut off. When the battery voltage input drops back within the normal voltage range, the inverter will re-
start.
3. Over–Temperature – If the inverter gets too hot, it will shut off. The overheating may be caused by high
ambient temperature, blocked air flow or an overload condition. When the inverter reaches an acceptable
temperature, it will restart.
4. Over–Power – The inverter will source up to its maximum power rating. If the load requires more, the
output voltage will be lowered to supply no more than its maximum power so the maximum power from
the inverter is reduced to a safe amount.
WARNING
The optional inverter generates 115VAC, the same as a wall receptacle. To prevent injury, do not put anything
into the electrical outlets other than an appliance power cord. Keep the outlets covered when not in use.
Do not submerge the unit or subject it to moisture.
VOLTAGE POSITIVE LEAD NEGATIVE LEAD
Approximately 24VDC Battery Red Battery Black
Approximately 120VAC Line Brown Neutral Blue