manualshive.com logo in svg

Stryker Medical Trauma 1002, Руководство по обслуживанию

Поделиться
Скачать
Stryker Medical Trauma 1002 Скачать руководство пользователя страница 10

Service Information

9

BRAKE ADJUSTMENT

Required Tools:

3/32” Hex Allen Wrench
Pry Bar
Thread ”Locktite”

Flat on thread of stud must always be
aligned with the set screw.  Turn must
always be full circle only.

BASE SIDE CONTROL PEDAL LINKAGE ADJUSTMENT

Required Tools:

3/8” Wrench

5/32” Hex Allen Wrench

7/16” Wrench

Bungee Cords

Adjustment Procedure:

1. Place 150–200 pounds on the litter and pump the litter up to full height.

2. Lift the base hood, separating the hood from the base frame.  Using the bungee cords, support the base

hood.

3. Using a 3/8” wrench and a 5/32” hex Allen wrench, loosen the appropriate pedal linkage adjustment nut

until the jack stops ”drifting”.  Raise the litter to full up.

4. Tighten the pedal linkage adjustment nut until the jack begins to slowly descend.

5. Using a 7/16” wrench, back the pedal linkage adjustment nut out four full turns.  Raise the litter to full up.

6. Loosen the pedal linkage adjustment nut and ensure no drift occurs.  If the jack drifts, repeat procedure.

Содержание Trauma 1002


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды