manualshive.com logo in svg

Stryker Medical COMPANION, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Stryker Medical COMPANION Скачать руководство пользователя страница 23

22

Assembly Instructions

Assembly part numbers
3100-100-200 (Split Top Table with T-Band)
3100-100-250  (Split  Top Table with Edge Mold)

NOTE
Lift/Lower Handle adjustment is properly set at the factory.  Do not adjust the locking nut prior to assembly
of product.

ASSEMBLY METHOD

1.1  Lift item A (cover) off the base frame.

1.2  Insert the bottom plate of item B (column assembly) through the opening in item A (cover) as shown.

1.3  Attach item B (column) to the base frame, as shown, using a 3/16“ Allen wrench and (3) item C

(truss head torx screw).

1.4  Attach item J (push nut) through the square opening in item E (base weldment).

1.5  Push the bottom flange of the bellows through the opening in item A (cover).

1.6  Place item A (cover) over the base.

1.7  Attach item A (cover) using (8) item D (truss head screws).

1.8  Attach item F (top assembly) to item H (outer mounting plate) using a 3/16” Allen wrench and (2) item

G (button head hex socket bolts).

Содержание COMPANION





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды