Stryker Medical 2025, Руководство по обслуживанию

Страница: 14 / 140

Maintenance Procedures – Base
13
POWER CORD REPLACEMENT
Required Tools:
#2 Phillips Screwdriver 7/64” Allen Wrench Bungee Cords (or Equivalent)
7/16” Socket Wrench Heyco Pliers
Replacement Procedure:
1. Raise the litter up to full height.
2. Unplug the power cord from the wall socket.
3. Using a #2 Phillips screwdriver, remove the three Phillips screws holding the base hood to the base frame.
4. If the bed is equipped with the 110V outlet option, remove the slotted screw holding the outlet cover. If
the bed does not have the 110V outlet option, remove the two slotted screws holding the cover plate.
5. Use bungee cords or the equivalent to secure the hood up and out of the way.
6. Remove the two 7/64” Allen screws holding the cover plate to the junction box and remove the cover.
7. Using a 7/16” socket wrench, remove the bolt from the ground ring terminal.
8. Unplug the power cord from the wiring harness and remove the power cord.
9. Reverse the procedure to install the replacement power cord and reinstall the base hood.
COIL CORD REPLACEMENT
Required Tools:
#2 Phillips Screwdriver Small Standard Screwdriver Wire Cutters
Bungee Cords (or Equivalent) 7/16” Socket Wrench Large Adjustable Wrench
Channel Lock Pliers
Replacement Procedure:
1. Manually crank the knee section up until it stops. Fold the knee section up and out of the way,
2. Using a #2 Phillips screwdriver, remove the four screws holding the litter access cover to the litter.
3. Using a 7/16” socket wrench, remove the three bolts securing the coil cord access cover.
4. Using a large adjustable wrench and channel lock pliers, remove the two strain relief grommets from the
bracket.
5. Using wire cutters, cut the wire ties holding the cord to the litter and the frame.
6. Unplug all connectors from both ends of the coil cord, noting their locations so they will be reconnected
properly.
7. Remove the cord from the bed.
8. Reverse the above procedure to install the replacement coil cord.