manualshive.com logo in svg

Stryker Medical 1068, Руководство по обслуживанию

Поделиться
Скачать
Stryker Medical 1068 Скачать руководство пользователя страница 5

Preventative Maintenance

4

CLEANING

1.

Hand wash all surfaces of the bed with warm water and mild detergent.  Dry thoroughly.

2.

Clean Velcro AFTER EACH USE.  Saturate Velcro with disinfectant and allow disinfectant to evaporate.
(Appropriate disinfectant for nylon Velcro should be determined by the hospital.)

NOTE
Quaternary Germicidal Disinfectants, used as directed, and/or Chlorine Bleach products, typically 5.25% So-
dium Hypochlorite in dilutions ranging between 1 part bleach to 100 parts water, and 2 parts bleach to 100
parts water are not considered mild detergents.  These products are corrosive in nature and may cause dam-
age to your stretcher if used improperly.  If these types of products are used to clean Stryker patient handling
equipment, measures must be taken to insure the stretchers are rinsed with clean water and thoroughly dried
following cleaning. Failure to properly rinse and dry the stretchers will leave a corrosive residue on the surface
of the stretcher, possibly causing premature corrosion of critical components.  Failure to follow the above
directions when using these types of cleaners may void this product’s warranty.

BIANNUAL CHECKLIST

  All fasteners secure (reference all assembly prints)

  Siderails move and latch properly (page 5)

  Engage brake pedal and push on the stretcher to ensure all casters lock securely (page 15)

  Steer function working properly

  All casters secure and swiveling properly

  Body restraints working properly

  I.V. pole intact and operating properly (page 56–58.4)

  Oxygen bottle holder intact and operating properly (page 32 or 33)

  Fowler operating properly

  Knee Gatch operating properly (page 48)

  Trendelenberg/Reverse Trendelenberg operating properly

  No rips or cracks in mattress cover

  Arm boards intact and operating properly (page 5)

  Arm board support levers intact and operating properly (page 40)

  Ground chain intact

  No leaks at hydraulic connections

  Hydraulic jacks holding properly (page 10)

  Hydraulic drop rate set properly (page 12)

  Hydraulic oil level sufficient (page 11)

  Lubricate where required, including the brake adjuster assembly and brake cam (page 15), and the

pin and block (”U” joint) on the Fowler assembly (page 44 & 45)

Serial No.______________

               ______________

               ______________

               ______________

               ______________

Completed By:_________________________________         Date:_____________

Содержание 1068

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды