DUAL TIME FUNCTION
ADJUSTING DUAL TIME HANDS POSITION
* After setting or changing the battery, before setting the time,
check if the dual time hour hand is at the "0" (24 o'clock) position.
* If the dual time hour hand is not at the "0" position, reset it
following the procedure shown below :
1) Pull out the crown to third click (VD31) / second click (VD32).
2) Keep the buttons A & B pressed at the same time for more
than 2 seconds, then release the buttons. * Dual time hour
hand moves and returns to where it was.
3) Press button A or B to reset the dual time hour hand to "0"
position. * Button A : dual time hour hand moves
counter-clockwise Button B : dual time hour hand moves
clockwise * The dual time hour hand moves quickly if the
respective buttons are kept pressed
4) Push the crown back in the position (1).
LOCAL TIME SETTING
1) Pull out the crown to third click (VD31) / second click (VD32)
when the second hand is at the 12 o'clock position.
2) Turn the crown to set the hour and minute hands. (make sure
24 hour hand is set correctly).
3) Push the crown back in the normal position in accordance
with a time signal. Note : * The 24 hour hand moves
correspondingly with the hour hand. * The moment the date
changes is midnight. When setting the hour hand, make sure
that AM/PM is correctly set by using the 24 hour hand as an
AM/PM indicator.
57
