A) SETTING THE TIME
1. Pull the crown out to the third position.
2. Turn the crown to set hour and minute hands.
3. After the time has been set, push the crown back to the
regular position (1).
B) SETTING THE DATE
1. Pull the crown out to the second position.
2. Turn the crown clockwise to set the date.
*If the date is set between the hours of around 9:00 PM and
1:00 AM the date may not change on the following day.
3. After the date has been set, push the crown back to the
regular position (1).
C) USING THE STOPWATCH
This chronograph is able to measure and display time in1/20
second united up to maximum of 59min 59 sec. The
chronograph 1/20 second hand keeps continuously for 30
seconds after starting and then stops at Zero position.
Stopwatch will stop automatically after running continuously for
31 minutes.
