![Struers Cooli System 1 Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/struers/cooli-system-1/cooli-system-1_instruction-manual_1385628026.webp)
Note
Replacement of safety critical components must only be performed by a Struers
engineer or a qualified technician (electromechanical, electronic, mechanical,
pneumatic, etc.).
Note
Safety critical components must only be replaced by components with at least the
same safety level.
7.5
Service and repair
We recommend that a regular service check be carried out yearly or after every 1500 hours of use.
When the machine is started up, the display shows information about total operation time and the
machines service information.
After 1500 hours of operation time, the display will show a message reminding the user that a service
check should be scheduled.
Note
Service must only be performed by a Struers engineer or a qualified technician
(electromechanical, electronic, mechanical, pneumatic, etc.).
Contact Struers Service.
Service check
We offer a range of comprehensive maintenance plans to suit the requirements of our customers.
This range of services is called ServiceGuard.
The maintenance plans include equipment inspection, replacement of wear parts,
adjustments/calibration for optimal operation, and a final functional test.
7.6
Disposal
Equipment marked with a WEEE symbol contains electrical and electronic
components and must not be disposed of as general waste.
Contact your local authorities for information on the correct method of disposal in
accordance with national legislation.
For disposal of consumables and recirculation fluid, follow local regulations.
Note
Dispose of swarf according to the current local safety regulations for handling and
disposal of swarf and cooling fluid additive.
Note
The cooling fluid contains additive and cutting swarf and may not be disposed of into
a main drain. Cooling fluid must be disposed of in compliance with local safety
regulations.
Depending on which metals are being cut, it is possible that the combination of the metallic swarf
(cutting debris) from metals with a large difference in electrode-positivity (a large distance apart in the
26
Cooli System
7 Maintenance and service