Struers Accutom-50, Руководство пользователя

Страница: 28 / 226

Accutom-50
Instruction Manual
24

Accutom-50 automatically stops the cutting process at the pre-
set stop position. (Make sure to compensate for possible wheel
wear when setting the stop position).

The sample is then retracted and the cut-off wheel is stopped.

The cutting process can be stopped at any time during operation
by pressing the STOP


To avoid stopping the process while the cut-off wheel still is in
the sample, press the POSITION key

for the Y-direction and
then press F2:SET STOP. The sample is retracted immediately
and the process will be stopped when the relative zero position is
reached.
key. The sample remains in its actual
position and the process stops there.

The display changes back to what it was before cutting was
started.
Stopping the Cutting
Automatic Stop
Manual Stop