manualshive.com logo in svg

Structural Concepts Impulse 62486, Руководство по эксплуатации, Страница: 7 / 66

Поделиться
Скачать
Structural Concepts Impulse 62486 Скачать руководство пользователя страница 7

7 

INSTALLATION: CASE REMOVAL FROM SKID / LINE-UP 

1. Remove Case From Skid

 

 

A. Fork Lift 



To lift case up for lift-truck forks to slide into 
position, use J-Bar Lift Tab (location #1 shown 
below) or Support Rung (location #2 shown 
below).   

 



Make certain case is well-supported on lift 
truck.  Move into position.

 

 

B. J-Bar or Dolly Only (No Fork Lift) 



See illustration at top right for J-Bar/Dolly case 
removal instructions.

 



Slide case to edge of skid.

 



With several people in position, carefully slide 
frame support rail to edge of skid.

 



With several people in position, slide case 
several more inches (off skid) and lower rear 
frame support to floor.

 



Once the rear frame support rail rests on the 
floor, have several people supporting front of 
case while skid is slid out from under case.

 



After case is off skid, several employees may 
be required to slide into position.

 



Note: Illustration below reflects general outline 
of sample case and does not reflect any 
particular model or options).

 

J-Bar 

Support Rung 

(J-Bar Lift 

Location #2) 

J-Bar Lift Tab 

(J-Bar Lift 

Location #1) 

Front 

Frame 

Support  

Rail 

 Rear 

Frame 

Support  

Rail 

Содержание Impulse 62486



































































Отзывы:

Нет отзывов