9
INSTALLATION, CONTINUED
-
MODEL HMO3953R.5749 ONLY: GENERAL LAYOUT
5. Model HMO3953R.5749 General Layout
Illustration below shows the general layout of
model HMO3953R.5749.
Case wiring source is from its adjoining case
(SCC P/N DP812R.5748).
View of Electrical Box, LED
Drivers, Contactor, Terminal
Block, Temperature Controller,
Main Power Switch, Etc.
Temperature
Controller and Main
Power Switch
Thermometer
Metal Surface
Shelving
6. Position & Align Case Alongside Other Cases
Before adjusting levelers (or shimming frame
support rails), make certain that the case is in
proper position and, if required, aligned with
adjoining case(s).
This may require the repositioning of the case you
are installing or the already positioned case(s).
7. Frame Support Rails Must Be Shimmed
Illustration below shows frame support rails.
Shims will be provided with all cases that have
frame support rails.
Use shims to level case.
Note: After case is in position, it must be
sealed to floor to prevent entry or leakage of
liquid or moisture.
Frame Support
Rails
Frame Support
Rails
