26
PREVENTIVE MAINTENANCE: HONEYCOMB (PERFORMED BY TRAINED SERVICE PROVIDERS ONLY)
1. Honeycomb Air Diffuser Removal
A. Wedge non-metallic device of suitable strength (such
as a ballpoint pen) between honeycomb and end panel.
Caution! Use care not to dislodge the heating wire (that
prevents condensation on the lamp assembly).
B. Apply pressure to collapse the honeycomb to allow it
to be pulled out of honeycomb retainer.
C. Pry downward and away from honeycomb retainer.
If honeycomb is dirty, allow to soak in hot, soapy water
in back room pot sink. Use nylon brush to remove dust,
A
B
C
D
E
F
debris and stubborn or sticky residue. Use spray nozzle
on pot sink or use RINSE spray bottle on honeycomb.
Allow honeycomb to air dry or use vacuum ‘blow mode’.
2. Honeycomb Air Diffuser Installation
D. Squeeze honeycomb into the honeycomb retainer
(behind header).
E. Carefully slide honeycomb into place.
F. Adjust honeycomb so that it fits flat against retainer.
It must not be wavy or out of position.
Honeycomb
Air Diffuser
Header
