4
PRECAUTIONS
Following are important precautions to prevent
damage to unit or merchandise.
Please read carefully!
See previous page for specifics on
OVERVIEW,
TYPE, COMPLIANCE
and
WARNINGS.
POWER CORD AND PLUG MAINTENANCE
Caution! Risk of electric shock.
If cord or plug becomes damaged, replace only with
cord and plug of same type.
WIRING DIAGRAM
Each case has its own wiring diagram folded and in
its own packet.
Wiring diagram placement may vary; it may be
placed near ballast box, field wiring box, raceway
cover, or other related location.
CAUTION! LAMP REPLACEMENT GUIDELINES
Ceramic metal halide lamps reflect specific size, shape and overall
design. Any replacements must meet factory specifications.
Ceramic metal halide lamps must be replaced with similar lamps.
CAUTION
CAUTION! ADVERSE CONDITIONS / SPACING ISSUES
Performance issues caused by adverse conditions are NOT covered
by warranty.
End panels must be tightly joined or kept at least 6-inches away from
any structure to prevent condensation.
Unit must be kept at least 15-feet from exterior doors, overhead HVAC
vents or any air curtain disruption to maintain proper temperatures.
Do not expose to direct sunlight or heat source (ovens, fryers, etc.).
Keep at least 8-inch clearance above unit for air discharge
(self-contained units only).
CAUTION
CAUTION! POWER CORD AND PLUG MAINTENANCE
Risk of electric shock. If cord or plug becomes damaged,
replace only with cord and plug of same type.
OVERVIEW / TYPE / COMPLIANCE / WARNINGS / PRECAUTIONS / WIRING / PLUGS - PAGE 2 of 2
CAUTION! GFCI BREAKER USE REQUIREMENT
If N.E.C. (National Electric Code) or your local code
requires GFCI (Ground Fault Circuit Interrupter) protection,
you MUST use a GFCI breaker in lieu of a GFCI receptacle.
WIRING DIAGRAM FORMAT & LOCATION
Each case has its own wiring diagram folded & in its own packet.
Wiring diagram placement may vary; it may be placed near ballast
box, field wiring box, raceway cover, or other related location.
