background image

Page 6 of 11 

 

Specific Operation Warnings 

WARNING

 

 

Risk of finger entrapment and laceration. 

 

Wear ANSI Z87.1 compliant protective goggles and equipment. 

 

Before use, fully deflate the tire. 

 

Ensure the wheel is stable and the work area if free and clear of debris. 

 

Secure and fully support any vehicles. 

 

Assembly Instructions 

WARNING

 

 

Always deflate tires before disassembling.  

 

Use the proper tools.  

 

Always be aware of the risk that there are always crushing hazards  

 

Lock the safety rods on the vehicle.  

 

The safety valve is set and sealed by the manufacturer. Do not tamper with it or change its 
calibration.  

 

Follow all instructions to avoid injury to people or damages to objects and surroundings. 

Connect the hydraulic pump (manual or air) to the bead breaker through the quick-couplers. If you use 

the air/hydraulic pump, you must connect it to a source of compressed air of 100-120 PSI.  

Test the bead breaker before you attach it to the rim. Release all air from the tire and remove the cap 

and valve, as well as the valve extension included. Be sure to verify that the tire is completely 

deflated! 

Before Each Use 

WARNING

 

 

Before the bead breaker is used, carefully inspect the unit each time for damages, or any missing, 
worn, or loose parts. 

 

Explosion hazard. Deflate tire before removing a wheel, rim, or part of a rim clamp or nut. 

Operating Instructions 

WARNING

 

 

Risk of finger entrapment and laceration. 

 

Wear ANSI Z87.1 compliant protective goggles and equipment. 

Содержание 56608












Отзывы: