Strongway 52862, Руководство пользователя

Страница: 5 / 11

Page 5 of 11
cutter. Do not use the tensioner and cutter while you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while operating the tool may result in serious
personal injury.

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving
parts. Air vents on the tool often cover moving parts and should be avoided.

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant safety
goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust mask in
dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection systems,
and hearing protection when appropriate. This applies to all persons in the work area.

Do not overreach. Keep proper footing and balance at all times.

Secure the work with clamps or a vise instead of your hand when practical. This safety precaution
allows for proper tool operation using both hands.
⚠
CAUTION
TENSIONER AND CUTTER USE AND CARE

Do not force the Manual Tensioner & Cutter Products do a better job and are safer when used in
the manner for which they are designed. Plan your work, and use the correct product for the job.

Check for damaged parts before each use. Carefully check that the Manual Tensioner & Cutter will
operate properly and perform its intended function. Replace damaged or worn parts immediately.
Never operate the Manual Tensioner & Cutter with a damaged part.

Store the Manual Tensioner & Cutter when it is not in use. Store it in a dry, secure place out of the
reach of children. Inspect the tool for good working condition prior to storage and before re-use.

Use only accessories that are recommended by the manufacturer for use with your Manual
Tensioner & Cutter. Accessories that may be suitable for one product may create a risk of injury
when used with another tool. Never use an accessory that has a lower operating speed or
operating pressure than the tool itself.
Operating Instructions
1. Press the handle down. Place one end of the strapping into the unit from right to left (see
directional arrow under the image).