background image

Page 5 of 12 

 

WORK AREA SAFETY 

 

Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit. 
Cluttered, wet, or dark work areas can result in injury. Using the lift in confined work areas may 
put you dangerously close to other cutting tools and rotating parts. 

 

Keep children and bystanders away from the work area while operating the lift. Do not allow 
children to handle the lift.  

 

Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in your 
work area. Some of these hazards may be hidden from your view and may cause personal injury 
and/or property damage if contacted. 

 

WARNING

 

PERSONAL SAFETY 

 

Stay alert, watch what you are doing, and use common sense when operating the lift. Do not use 
the tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of 
inattention while operating the tool may result in serious personal injury. 

 

Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing 
and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving 
parts. Air vents on the tool often cover moving parts and should be avoided. 

 

Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant 
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust 
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection 
systems, and hearing protection when appropriate. This applies to all persons in the work area.  

 

Do not overreach. Keep proper footing and balance at all times.

 

 

CAUTION

 

LIFT USE AND CARE 

 

Do not force the lift. Products do a better job and are safer when used in the manner for which 
they are designed. Plan your work, and use the correct product for the job. 

 

Check for damaged parts before each use. Carefully check that the lift will operate properly and 
perform its intended function. Replace damaged or worn parts immediately. Never operate the lift 
with a damaged part. 

 

Store the lift when it is not in use. Store it in a dry, secure place out of the reach of children. 
Inspect the tool for good working condition prior to storage and before re-use. 

 

Use only accessories that are recommended by the manufacturer for use with your lift. 
Accessories that may be suitable for one product may create a risk of injury when used with 
another tool. Never use an accessory that has a lower operating speed or operating pressure 
than the tool itself. 

 

Содержание 52398













Отзывы: