1200-LB. CAPACITY DUMP CART
OWNER’S MANUAL
1200-LB. CAPACITY DUMP CART
OWNER’S MANUAL
STEP 4: Attach Wheel Axle (See Fig. 4)
1. Center the hitch tongue assembly in the wheel axle support.
2. Insert the axle through the hole and slide it through both the axle support and the hitch
tongue assembly.
3. Tighten all hardware through steps 1 to 3.
STEP 5: Attach the Wheels (See Fig. 5)
1. Put an Ø20 flat washer on the axle; slide the wheel over the end, add a second Ø20 flat
washers and secure with Ø4 R-pin.
2. Repeat the process for the other side of the axle.
STEP 6: Attach Side Panel (See Fig. 6)
1. Attach the left and right side panel assemblies to the bottom panel using the four hinge pins
STEP 7: Attach the Front Panel (See Fig. 7)
1. Attach the front panel to the bottom panel and secure using the using the two hinge pins.
2. Lock the left and right side panel assemblies in place using the handle.
STEP 8: Attach the Rear Panel (See Fig. 8)
1. Slide the rear panel through the slots on the back side panels.
NOTE:
The rear panel pins must go through the holes on the side panels to lock the panel in
place.
STEP 9: Attach Side Rails and Front Rail (See Fig. 9)
1. Insert the side rails into the two holes on the side panels.
2. Secure the front rail using the two
Ф
3 R pins.
4 of 7
5 of 7
Fig. 4
Fig. 7
Fig. 9
Fig. 8
Fig. 5
Fig. 6
