Strongway 46217, Руководство пользователя

Страница: 3 / 18

3
IMPORTANT SAFETY CONSIDERATIONS
DO NOT OPERATE OR REPAIR THIS EQUIPMENT WITHOUT READING THIS MANUAL.
To maintain the Service Jack and user safety, the responsibility of the owner is to read and follow these instructions.

Inspect the service jack for proper operation and function.

Keep instructions readily available for equipment operators.

Make certain all equipment operators are properly trained; understand how to safely and correctly operate the unit.

Allow unit operation only with all parts in place and operating properly.

Use only genuine replacement parts.

Service and maintain the unit only with authorized or approved replacement parts; negligence will make the jack
unsafe for use and void the warranty.

Carefully inspect the unit on a regular basis and perform all maintenance as required.

Store these instructions in the handle of your jack.

Keep all decals on the unit clean and visible.
Safety
Always follow safety precautions when installing and operating this jack. Keep all decals on the unit clean and visible.
Before proceeding ensure that you fully understand and comprehend the full contents of this manual. Failure to operate
this equipment as directed may cause injury or death. The distributor is not responsible for any damages or injury
caused by improper use or neglect.
WARNING:
Always use Jack Stands!
DO NOT USE
wood blocks or any other non-approved load sustaining devices. The manufacturer only warrants loads
to be sustained by jack stands that meet current ASME standards.
DO NOT USE wood blocks or any other non-approved lifting devices for a means of lifting with the jack and or load
being raised. Failure to head these warnings may cause injury or death.
SAFETY MARKINGS
WARNING:
1. Study, understand, and follow all instructions before operating this device.
2. Do not exceed rated capacity.
3. Use only on hard, level surfaces.
4. Lifting device only. Immediately after lifting, support the vehicle with appropriate means.
5. Lift only on areas of the vehicle as specified by the vehicle manufacturer.
6. No alterations shall be made to this product.
7. Only attachments and/or adapters supplied by the manufacturer shall be used.
8. Do not get under or allow anyone under the vehicle until it has been supported by jack stands.
9. Center load on saddle prior to lifting.
10. Some vehicles require an adapter to properly engage the frame for lifting.
Use vehicle manufacturer’s
instructions on proper lifting.
11. Do not use this jack for any use other than the manufacturer specified usage.
12. Do not drop load suddenly, the resulting shock may cause damage to the unit.
13. Failure to heed these markings may result in personal injury and/or property damage.